pH, ORP, and Titration, Combination Electrodes
Oakton by Cole-Parmer Self-Cleaning Flat Surface ORP Probe, DJ/Ryton/Au/10'/BNC
Use these unique double-junction electrodes in your most difficult ORP applications. Flat surface does not collect suspended solids--fluid flow across the electrode provides a cleaning action that extends electrode life and improves performance. Annular junction reduces reference cell fouling. Choose either a CPVC housing (max temp 80°>C) or chemical resistant Ryton housing (max temp 100°>C). Both types have 10-ft cables and can be used at pressures up to 100 psi. BNC connectors match a variety of meters and controllers. Install electrodes in tee fittings--3/4'' NPT(M) thread and 2'' insertion depth.
Cole-Parmer Oakton ORP electrode, epoxy body, single junction, 12 mm dia x 110 mm L, 0.9-m cable
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Oakton ORP Electrode, Single-Junction, Submersible; 12 x 130 mm
ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212>F (-5 to 100>C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230>F (-5 to 110>C).
Research Products International Corp Replacement Platinized Titanium Electrode for Genie Blotter
Replacement Platinized Titanium Electrode for use with Genie Blotter
Hach Company Radiometer Analytical PHC3005-9 Combination pH Electrode (epoxy body, Ag/AgCl ref., screw cap)
The Radiometer PHC3005-9 Combination pH Electrode has a robust epoxy body, Ag/AgCl reference system, refillable electrolyte (3M KCl + sat. AgCl) and porous pin junction for general purpose applications. The PHC3005-9 is a screw cap electrode and requires the CL114 cable (part no. A94L114) for compatibilty with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).
Hach Company Radiometer Analytical M231Pt Metal Electrode (platinum wire sensor, screw cap)
The Radiometer M231Pt Metal Electrode has a platinum wire sensor and is recommended for general purpose measurements. An external reference electrode is required. The M231Pt is a screw cap electrode and requires the CL114 cable (part no. A94L114) for use with Hach Sension+ laboratory and other BNC-compatible meters/titrators.
World Precision Instrument Potassium Electrode Tips, Replacement
Replacement tips
Set of 3 potassium replacement tips for ion selective electrodes. Change the tip on your holder in less than a minute. Can be stored 3-4 months under refrigeration.
World Precision Instrument STX HTS EVOM Electrode for CORNING 96
Semi-permeable HTS (high throughput screening) culture plates have become a standard tool for pharmaceutical and institutional research in epithelial transport. HTS culture plates have well cups which are bonded together into a single assembly and are not removable. This makes the plates ideal for automated applications, but imposes a significant inconvenience when TEER must be measured in the absence of an automated system. WPI’s STX HTS series of EVOM™ electrodes, replacing the STX100 electrodes, provide a cost-effective alternative to automation, allowing HTS well plates to be measured manually using a hand–held electrode.
To learn more about our warranty options, click here.
World Precision Instrument Carbon Fiber Electrode, L 100 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Electrode Adapter for DAM50 Bioamplifier
Simplify your input connections to the DAM50 when you are setting up your applications
This optional electrod adapter is designed for use with the DAM50 Bioamplifier. See some of the sample setups possible with this component in the Details below.
World Precision Instrument Carbon Fiber Electrode, Length 50 um
Electrochemical detection of oxidizable compounds
Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI™s ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our Micro-C Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.
World Precision Instrument Electrode Handle 4.0 mm
Electrode holder for popular manipulators
This 4.0 mm electrode holder is designed for use with Narishige and Zeiss manipulators
Hach Company Analog pH/ORP/Dissolved Oxygen Sensor Input Module for SC200 Universal Controller
The pH/ORP/Dissolved Oxygen module for the SC200 is a user installed module that allows for connection of analog pH, ORP, and dissolved oxygen sensors to the controller. This module works with combination and differential pH and ORP sensors as well as amperometric dissolved oxygen sensors. See manual for additional connection information.
Hach Company Radiometer Analytical XM150 Metal Electrode (for Voltammetry applications, platinum disc sensor, screw cap)
The Radiometer XM150 Metal Electrode has a platinum disc sensor and is recommended for Voltammetry applications. The XM150 is a screw cap electrode and requires an external connection cable for connection to a meter.
Hach Company Radiometer Analytical PHC2011-8 Combination Red-Rod pH Electrode for Alkaline Samples (alkaline glass, glass body, BNC)
The Radiometer PHC2011-8 Combination pH Electrode has a glass body, Red-Rod reference system, refillable electrolyte (sat. KCl) and porous pin junction. The PHC2011-8 has a glass membrane specific for alkaline samples. The PHC2011-8 is compatible with Hach Sension+ laboratory pH meters (or any meter with a BNC connection).